Micro Drill- 3 Cutting Edge Drill Bits can be yours in no time. Contact us as soon as you land up to this page. Our company Taiwan Microdrill Co., Ltd. Is specialist provider of all kinds of microdrill. Our engineers are trained to produce this kind of drill out od material that makes it precise, hard and resistant to abrasion. It is an apt tool for drilling metal alloys, such as carbon steel, stainless steel, copper and titanium. The cutting length of this microdrill is 15 times cutting diameter. We can custom make this microdrill in desired cutter length, neck diameter and length, and point angle. Come to us to meet your requirement for this micro drill with three flutes.
We can customize the size and flute length of your request.
|Micro Drill- 3 Cutting Edge Drill Size Chart|
|Cutting Diameter Ø||Cutting Length L (mm)||Point Angle°||Cutting Diameter Ø||Cutting Length L (mm)||Point Angle°|
|0.040 ~ 0.070||15 Ø||120°||0.36 ~ 0.38||5.5 mm||120°|
|0.070 ~ 0.100||15 Ø||120°||0.39 ~ 0.41||6 mm||120°|
|0.11 ~ 0.15||15 Ø||120°||0.41 ~ 0.43||6 mm||120°|
|0.15 ~ 0.20||15 Ø||120°||0.44 ~ 0.46||7 mm||120°|
|0.21 ~ 0.23||15 Ø||3.5 mm||120°||0.47 ~ 0.50||7.5 mm||120°|
|0.24 ~ 0.27||15 Ø||4.2 mm||120°||0.51 ~ 0.80||8 mm||120°|
|0.28 ~ 0.30||15 Ø||4.5 mm||120°||0.81 ~ 0.99||8.5 mm||120°|
|0.31 ~ 0.32||15 Ø||5 mm||120°||1.0 ~ 1.2||9 mm||120°|
|0.33 ~ 0.35||15 Ø||5.2 mm||120°||1.20 ~ 1.40||9 mm||120°|
* Cutting Length L (mm) = 15 Ø (15 Times Cutting Diameter).
* 0.02~0.03 Drill bits is Single Cutter. Provide each 1 um (0.001 mm) a specification.
* Customize our drill and mill’s cutter length (L1), neck length (L2), neck diameter (Ø 2) and point angle (θ) for your request.
Micro Drill - 3 Cutting Edge Drill 0.05 x 0.75 L
Micro Drill- 3 Cutting Edge Drill 0.7 x 8 L